Effect of solutionizing heat treatment on the structure and mechanical properties of silicon bronze (Cu-10wt%Si-2wt%Ni)

Ukamaka E Ezeobi*, Chidume N Nwambu, Eugene E Nnuka and Bala M Bosan

The effect of solutionizing temperature, soaking time, and quenching media on the structure and mechanical properties of silicon bronze (Cu-10wt%Si-2wt%Ni) has been examined. The samples were produced using the sand casting technique, machined to the required dimensions, and solutionized at temperatures of 700 oC, 800 oC, and 900 oC for 0.5, 1.5, 2.5, and 3.5 hrs and quenched in brine and oil respectively. The prepared as-cast and solution heat-treated samples were subjected to mechanical tests (hardness, and impact strength tests) as well as microstructural analysis. The results of the microstructural analysis revealed the presence of coarse grains and coarse sparse distribution of Ni2Si precipitate in the as-cast sample while the surface morphology of the heat-treated samples consisted of fine grains of intermetallic compounds evenly dispersed in the copper matrix. It was also observed that the microstructures of samples solutionized at lower temperatures (700 oC) revealed finer grains with better grain distributions compared with samples solutionized at higher temperatures (800 oC and 900 oC). These microstructural changes led to the improvement of the hardness and impact strength of the alloy. The hardness value of the as-cast sample 48.5 HRB, increased to 53.7 HRB and 57.8 HRB after solid solution heat treatment at 700 oC for 3.5 h and cooled in brine and oil, respectively. It was also observed that the hardness of the brine-cooled samples increased further to 72.45 HRB after 3.5 h at 900 oC. The results obtained also showed that the solid solution heat-treated samples gave an optimum impact strength value of 214 J/m3 and 183 J/m3 from the samples solutionized at 900 oC and 800 oC for 3.5 h and 1.5 h and cooled in brine and oil respectively. This was concluded to be a result of solid solution alpha and beta phases formed which improve energy absorption in the alloy.

Keywords:

Published on: Jun 22, 2024 Pages: 17-22

Full Text PDF Full Text HTML DOI: 10.17352/abse.000033
CrossMark Publons Harvard Library HOLLIS Search IT Semantic Scholar Get Citation Base Search Scilit OAI-PMH ResearchGate Academic Microsoft GrowKudos Universite de Paris UW Libraries SJSU King Library SJSU King Library NUS Library McGill DET KGL BIBLiOTEK JCU Discovery Universidad De Lima WorldCat VU on WorldCat